Modular Vented Pegboard Shelf System

🌿 Transform unused pegboard space into additional growing and display space with a modular shelf system designed for greenhouse cabinets and plant displays.

🧩 Fully modular – use individual sections or combine them to create a complete U-shaped shelf system

💨 Vented shelf base – promotes airflow and allows excess water to drain freely

🪴 Raised retaining edge – helps keep pots and propagation cups securely in place

🔗 Integrated pegboard mounting – simply slot into your pegboard with no additional brackets or fixings required

📐 Two shelf depths – choose from 5.6cm or 7cm to suit your setup

🌱 Two pegboard fits – available for standard IKEA SKÅDIS or Phantom Foliage 3mm pegboards

🖤 Black or White PETG

🇬🇧 Designed and 3D printed in the UK by Phantom Foliage

Modular by Design

Designed to make use of otherwise wasted space around the edges of your plant cabinet, the Modular Vented Pegboard Shelf System can be configured to suit your individual setup.

Each section can be used independently or combined with additional pieces to create a continuous U-shaped growing shelf.

Perfect for displaying smaller plants, propagation cups, corms, plantlets and accessories without sacrificing valuable cabinet floor space.

Left Corner

A vented corner shelf designed for the left-hand side of your pegboard setup.

Use individually or combine with the Straight/Centre and Right Corner sections to build a larger shelf system.

Right Corner

The corresponding vented corner shelf for the right-hand side of your setup.

Can be used independently or combined with the other modular sections.

Straight/Centre

A straight vented shelf section designed to sit between the Left and Right Corner shelves.

It can also be used independently as a compact straight pegboard shelf.

Complete U-Shaped Sets

Want the complete setup? Choose one of the Full U options for all of the sections required to create the corresponding U-shaped shelf system.

Full U – Small

Includes:

Left Corner + Right Corner

Designed to create the complete U-shaped shelf configuration for the 45cm IKEA ÅKERBÄR.

Full U – Large

Includes:

Left Corner + Straight/Centre + Right Corner

Designed to create the complete U-shaped shelf configuration for the 65cm IKEA ÅKERBÄR.

Individual sections are also available separately, allowing you to expand, replace or reconfigure your shelf system whenever you wish.

Choose Your Shelf Depth

Each configuration is available in two depths:

5.6cm Depth

A slimline shelf ideal for smaller pots, propagation cups, corms and plantlets.

The shallower footprint maximises usable vertical growing space while still creating an additional tier for your collection.

7cm Depth

Provides additional shelf space for larger pots, plants and accessories while retaining the same modular design and integrated mounting system.

Pegboard Compatibility

Please select the correct pegboard fit for your setup when ordering.

Standard IKEA Pegboards

Designed for standard IKEA SKÅDIS pegboards.

This version can also be used with Phantom Foliage 3mm pegboards. Due to the difference in pegboard thickness, however, the shelf will have an approximately 2mm forward lean when fitted to a 3mm Phantom Foliage board.

If you would like the flexibility to move your shelves between standard IKEA SKÅDIS and Phantom Foliage pegboards, choose the Standard IKEA Pegboards option.

3mm Phantom Pegboards

Designed specifically for Phantom Foliage 3mm pegboards and other compatible 3mm-thick pegboards.

This provides the correct fit and shelf position when used with a 3mm board, without the additional lean created by the Standard IKEA version.

⚠️ The 3mm Phantom Pegboard version will not fit a standard IKEA SKÅDIS pegboard.

Vented Design

The open vented shelf base helps maintain airflow around pots and allows excess water to drain freely rather than collecting on the shelf.

This makes the system particularly well suited to humid greenhouse cabinets, propagation setups and enclosed growing environments.

A raised edge runs around the exposed side of the shelf to help keep pots and cups safely contained.

Perfect For

• Greenhouse cabinets
• IKEA ÅKERBÄR setups
• SKÅDIS pegboard plant displays
• Alocasia and Anthurium plantlets
• Small aroids
• Carnivorous plants
• Corms and propagation cups
• Tissue culture acclimation
• Small pots and accessories
• Creating additional growing tiers without taking up floor space

Material & Colours

Each shelf is 3D printed in durable PETG, selected for its strength, moisture resistance and suitability for humid growing environments.

Available in:

🖤 Black
🤍 White

Alternative colours may be available upon request – please contact us before ordering.

How to Order

Select your required options from the menus:

Product

• Full U – Large
• Full U – Small
• Left Corner
• Right Corner
• Straight/Centre

Depth & Pegboard Fit

• 7cm Depth – Standard IKEA pegboards
• 7cm Depth – 3mm Phantom pegboards
• 5.6cm Depth – Standard IKEA pegboards
• 5.6cm Depth – 3mm Phantom pegboards

Colour

• Black
• White

Please double-check your pegboard selection before ordering, particularly if you are using a standard IKEA SKÅDIS board, as the 3mm Phantom version will not fit IKEA SKÅDIS.

What's Included

Your selected shelf section or Full U set in your chosen depth, pegboard fit and colour.

Full U – Small:
2 shelf sections – Left Corner + Right Corner

Full U – Large:
3 shelf sections – Left Corner + Straight/Centre + Right Corner

Pegboards, cabinets, plants, pots and other accessories shown in product photographs are not included.

Production

Each piece is designed and made to order by Phantom Foliage in the UK.

As with all 3D printed products, minor layer lines, seams or small surface variations may be visible. These are a natural characteristic of the manufacturing process and do not affect the function of the product.

Every item is individually checked before dispatch.

Designed by a plant collector, for plant collectors 🌿